pxl

Fyne Audio

F300

£229.99

The best “ultra-budget” speaker we’ve heard in a long time, the F300 comes in a choice of attractive finishes and works brilliantly on a sideboard, shelf or dedicated speaker stands. Ideally partnered with a Sonos Amp or Rega Io for an elegant and neat system.

Or, if you want to help out a good cause too, we have one pair of black F300s available for just £179 here:
ebay.co.uk/itm/125374652729
proceeds go to Children’s Outdoor Learning and Play at a local school 😊

Dimensions (H x W x D): 250 x 156 x 211mm
Weight (each): 3.7kg

Clear

Pre-fitted to the rear panel of the F300 is a bracket allowing the speaker to be easily flush-mounted to a wall. This is a really handy feature where space is at an absolute premium, or for using the speaker as a rear effects speaker in home cinema set up.

Cabinet
A well-constructed cabinet is the starting point for any high-performance loudspeaker. Exceptional rigidity is provided on all F300 models through a combination of MDF panels which are cross-braced internally. Additional stiffness is achieved by coupling the low frequency driver’s magnet to the cabinet bracing using a resonant-absorbing mastic. Widening the footprint on the floor standing models, using a plinth with floor coupling spikes, provides stability for tight bass and accurate stereo imaging.

Crossover
Optimal performance of each of the F300 models is assured by using high quality precision components within the crossover, including low loss LF laminated core inductor and HF polypropylene capacitors. Although the designs are computer optimised, fine-tuning is always undertaken through critical auditioning. The gold-plated speaker terminals ensure a clean signal path and the top of the range F303 has bi-wire terminals fitted to further enhance performance.

Driver Technology
Fyne Audio aims to provide best in class performance at all price levels and the careful component selection for the F300 drivers helps to meet this goal.

Utilising a multifibre paper cone on the bass/midrange drivers delivers a natural sounding midrange and clean transient behaviour. Fitted to the centre of the driver is a phase plug which provides smooth midrange roll-off characteristics. FyneFluteTM technology, used on the driver’s roll rubber surround, provides a non-homogeneous interface which very effectively terminates cone energy.

Tweeter
The tweeter combines a powerful Neodymium magnet system with a 25mm Polyester dome producing crisp and controlled high frequency detail. Integrated within the protective mesh cover is a phase loss compensator which delays the output from specific areas of the dome to give a smooth and extended response.

Fyne Audio May Be A New Name In Audio But…
When you invest in a pair of FYNE AUDIO loudspeakers, you’ll be pleased to know that the development of each product has been undertaken by an enthusiastic and experienced team who have been in the loudspeaker business for very many years. At every level of the design process, be it acoustic know-how, mechanical engineering, choice of materials or manufacturing expertise, Fyne loudspeakers have been tuned to offer best in class performance.

Fyne Audio F300

Fyne Audio F300

Technical Specification

  • System Type 2 way, rear ported
  • Recommended amplifier power (Watt RMS) 20 – 70
  • Continuous power handling (Watt RMS) 35
  • Sensitivity (2.83 Volt @ 1m) 87dB
  • Nominal impedance 8 Ohm
  • Frequency response (-6dB typical in room) 54Hz- 28kHz
  • Drive unit complement 1 x 125mm multi-fibre bass/ mid 1 x 25mm polyester dome tweeter
  • Crossover frequency 3.4kHz
  • Crossover type 2nd order low pass, 3rd order high pass
  • Dimensions – HxWxD 250 x 156 x 211mm (9.8 x 6.1 x 8.3”)
  • Weight – Each 3.7kg (8.2lb)
  • Finishes Walnut / Black Ash / Light Oak
Fyne Audio F300

Fyne Audio F300