Fyne Audio

F302i Floorstanding Speakers

£599.99

Fyne Audio’s entry level floorstanding speaker which sits directly on your floor (as opposed to a shelf or dedicated speaker stand). Upgraded in 2021 to F302i, the new model has improved tweeters and crossovers. The F302’s 25mm polyester dome has been replaced by a titanium design derived from the more upmarket F500 series. The tweeter housing and crossover have also been revised to maximise performance.

The F302i is a smashing speaker, very easy to drive and generates a more tangible sound than the F300/F301 by way of the larger speaker cabinet.

Building on the multi-award-winning F302, the floorstanding F302i brings an upgraded titanium tweeter and improved crossover to deliver a clearer more detailed treble. Thanks to the extended high frequency it takes the music listening experience to an even more dynamic level. The enhanced performance will be appreciated even if listening to the speaker at relatively low volume levels and the power handling capacity ensures it doesn’t suffer from distortion when you just want to crank it up. The inspired magnetic grille storage to the rear, originally seen on the F500 Series, gives you somewhere safe and tidy to store your grilles during play back. The F302i is the perfect choice for the Hi-Fi or home theatre enthusiast.

WHAT HI-FI ⭐⭐⭐⭐⭐
“Fyne Audio has done a good job with the F302i, preserving everything we like about the Award-winning predecessors while ironing out the main weak spot. If you’re looking for a great-sounding pair of affordable floorstanders, these definitely deserve an audition.”

Detailed at the top end
Placing the tweeter right at the top of the speaker and fitting it within a curved baffle helps enhance the speakers sound staging. This means you get a bright, open sound that spreads generously between the speakers. The polyester tweeter unit also provides pin-sharp detail while remaining smooth and easy on the ear – the ideal balance.

Multifibre cones with fluted rubber surrounds for natural-sounding mid-range
The woofer units have been carefully designed to balance clear, articulate mid-range with powerful bass. The multifibre cones are attached to the chassis by fluted rubber surrounds. These effectively damp unwanted resonances, making the speakers sound exceptionally smooth and life-like.

Floorstanding design for enhanced bass
Although the F302i speakers are finely balanced and natural-sounding, the larger cabinet size also gives them plenty of bass. Perfect for use in larger rooms, at higher volumes or as the main speakers in a home cinema system, the F302i simply gives you a deeper, richer sound.

Choice of colour
Strikingly finished, the F302i speakers are available in a choice of walnut, black ash or light oak vinyls. For enhanced stability, plinths are also provided.

Fyne Audio F302

Fyne Audio F302

Fyne Audio F302

Fyne Audio F302

Technical Specification

  • System Type 2 way, rear ported
  • Recommended amplifier power (Watt RMS) 30- 180
  • Continuous power handling (Watt RMS) 60
  • Sensitivity (2.83 Volt @ 1m) 90dB
  • Nominal impedance 8 Ohm
  • Frequency response (-6dB typical in room) 36Hz-34kHz
  • Drive unit complement 1 x 150mm multi-fibre bass/ mid 1 x 25mm titanium dome tweeter
  • Crossover frequency 3.2kHz
  • Crossover type 2nd order low pass, 3rd order high pass
  • Dimensions – HxWxD 932 x 233 x 308mm (36.7 x 9.2 x 12.1”)
  • Weight – Each 13.3kg (29.3lb)
  • Finishes Walnut / Black Ash / Light Oak